Opis artikla
1 Unit 19"rack 4 channel Class-D amplifier – 100/70 volts
• Class D design with SMPS
• 4 x 150 W on 70V/100V line
• Balanced inputs on Euroblock connectors
• Speaker outputs on Euroblock connectors
• 1 Unit 19” rack mount
• 5,4 Kg Light weight
|
|
---|---|
Power 70V (RMS) One Channel Driven |
150W |
Power 70V (RMS) All Channel Driven |
135W x 4 |
Power 100V (RMS) One Channel Driven |
150W |
Power 100V (RMS) All Channel Driven |
135W x 4 |
Input Sensitivity (Limiter Off) |
0.9 – 1.1V (+0/-1dBv) |
Input Impedance |
20kΩ balanced or 10kΩ unbalanced |
Frequency Response |
(At 10dB Below Rated Power) 100Hz~15kHz (+0/-3dB) |
Voltage Gain (100V) |
40 (+0/-1dB) |
THD |
(Ref. 1kHz 1/8 Rated Power, A-Weighted) <0.1% |
S/N Ratio |
(Ref. Rated Power, A-Weighted) > 95dB |
Crosstalk |
(Below Rated Power) > 70dB |
Damping Factor |
(1kHz, 8W) > 180 |
Power/Output Circuity |
Switching Power Class-D |
Protections |
Full short circuit, open circuit, thermal, ultrasonic, and RF protection stable into reactive or mismatched loads, turn ON/OFF, muting, tried crowbar. |
Controls |
Front: On/Off Power Switch, Volume Channel A, B |
|
Rear : 70/100V selector |
Indicators |
SIGNAL: 2 green LED – CLIP 2 red LED |
POWER |
1 green LED – PROTECTION: 2 red LED |
Connectors |
Inputs: Euro Block – Outputs: Euro Block |
Power Supply |
AC: 110-120V or 220~240V 50/60Hz |
Dimension (W x D x H) |
483 x 360 x 44 mm |
Weight |
4.7 kg |