• +387(0)39 832 773

    sve informacije na telefon

  • Besplatna dostava

    za kupnju preko 200KM

Prijava

Unesite ispravnu email adresu
Unesite lozinku

Registracija

Unesite ime
Unesite prezime
Unesite ispravnu email adresu
Unesite lozinku
Unesite lozinku ponovo
Unesite grad
Unesite adresu
Unesite broj telefona/mobitela

Obnova lozinke

Unesite ispravnu email adresu

FBT JMaxX 110A aktivni zvučnik
Šifra: 12587

  • 1099,00 KM
Razglasi i studio oprema
Razglasi i studio oprema - Zvučnici AKTIVNI
FBT

PROCESSED 2-WAY ACTIVE LOUDSPEAKER 700W + 200W – 129.5 DB SPL

Prolight+Sound 2019 will see the world debut of JMAxX, a brand new line of maximum performance portable loudspeakers from FBT, successor to the original FBTMaxX series international best seller.

The new FBT JMaxX series combines ease of use and versatility for many portable or installed sound applications: musicians, DJs, AVL contractors, rental sound reinforcement, corporate events, houses of worship, bars and clubs. With its eye-catching gas-injected forms designed to virtually eliminate undesired enclosure resonance and reinforce strong low frequency performance, the JMaxX series of powered loudspeakers is available in three elegantly crafted two-way models: the 14-inch JMaxX 114A; the 12-inch JMaxX 112A; and the 10-inch JMaxX 110A. All are equipped with FBT’s latest 90° x 60° HF horn design which delivers improved projection, accuracy, and dispersion of the mid and high frequencies. Providing a myriad of possibilities for bands, DJs and solo artists, as well as for permanent installations, each JMaxX model is actually four loudspeakers in one.

Derived from a decade of experience of portable sound reinforcement, the carefully tailored equalisation presets offer highly intelligible response for vocals and floor monitoring; slightly boosted response in lounge bar applications; punchy and forward sound for DJs and night venues; and a general-purpose EQ setting that mirrors the original and familiar FBTMaxX voicing. Common to all JMaxX models is FBT’s latest generation lightweight 700W + 200W Class D power amplifier with universal switch mode power supply, delivering abundant power and headroom to reproduce even the largest transients without distortion. XLR inputs and outputs, volume control, the EQ presets and filters, and ground lift switch are all conveniently located on a clearly laid out rear panel, making loudspeaker setup and operation intuitive and consistently repeatable. JMaxX’s versatility is further underscored by the many mounting and fixing options that the ergonomically styled cabinets provide.

Mounting in fixed installations is made easy using the M10 suspension points or wall bracket flange plates, while portable use is facilitated by the built-in 35mm pole mount socket. There’s no need for separate stage monitors, as JMaxX’s cabinet profiles are designed with 12°, 40°, and 55° wedge angles, and when used with the specific floor monitoring EQ presets, will ensure that performers hear themselves with ultimate clarity.


 

Code: 42604
Configuration: 2 way
Built-in amplifier LF/HF: 700/200 W RMS
Built-in amplifier peak LF/HF: 1400/400 W
Frequency response: 58Hz - 20KHz -6dB
Low Frequency woofer: 10 - 2 coil inch
High Frequency driver: 1 - 1 coil inch
Maximum SPL cont/peak: 123.5 / 129.5 dB
Dispersion: 90° x 60° HxV
Input impedance: 22 Kohm
Crossover Frequency: 1.8 KHz
AC Power requirements: 640 VA
Input connector: XLR with loop, Jack 6.3mm
Power cord: 5 16,4 m/ft
Net Dimension (WxHxD): 320x550x275 12,6x21,6x10,8 mm/inch
Net Weight: 11/24.2 Kg/lb
Transport Dimension (WxHxD): 400x630x360 15,7x24,8x14,2 mm/inch
Transport Weight: 13.5/29.8 Kg/lb
  • 10” LF woofer with 2” voice coil
  • 1’’ exit throat HF compression driver with 1” voice coil
  • Frequency response from 58Hz to 20 kHz
  • Extremely lightweight: only 11Kg
    • 2-way, bi-amplified bass reflex design cabinet
    • 700W RMS LF, 200W RMS HF, Class D power amplifiers with switch mode power supply
    • DSP with 4-EQ presets
    • Control panel with: XLR IN and XLR LINK, Volume, EQ presets, HP filter, GND LFT switch
    • 2 x M10 suspension points, 35mm (1.3/8”) top-hat speaker stand socket, wall bracket mount flange plate
    • 90°H x 60°V constant directivity horn
    • Stage monitor angling facility with 12°, 40° or 55° taper

 

FBT,JMaxX,110A,aktivni,zvučnik,Razglasi,i,studio,oprema,Razglasi,i,studio,oprema,-,Zvučnici,AKTIVNI,
Unesite vaše ime i prezime
Unesite ispravnu email adresu
Unesite poruku vezanu za artikal
Da li ste robot?
Vaš upit je uspješno poslan.Uskoro će Vam se javiti netko od djelatnika.Lijep pozdrav.

Poruka